Iodine-transfer polymerization and CuAAC “click” chemistry: A versatile approach toward poly(vinylidene fluoride)-based amphiphilic triblock terpolymers

This study presents the synthesis and properties of linear PVDF-based amphiphilic triblock terpolymers with PS and PEO, [PVDF-b-PS-b-PEO], by adopting a procedure that involves: (a) iodine-transfer polymerization (ITP) of VDF with 1-iodoperfluorohexane (C₆F₁₃I) serving as chain-transfer agent (CTA) to afford C₆F₁₃-PVDF-I, (b) ITP of styrene with the C₆F₁₃-PVDF-I macromolecular-CTA to obtain C₆F₁₃-PVDF-b-PS-I diblock copolymer, (c) end-group exchange from iodo- to azido-group by nucleophilic substitution reaction with NaN_3, and (d) copper-catalyzed azide-alkyne cycloaddition (CuAAC) with alkyne-terminated PEO to achieve C₆F₁₃-PVDF-b-PS-b-PEO triblock terpolymers. The ¹H and ¹⁹F NMR spectroscopy confirmed the presence of all blocks, while gel permeation chromatography traces showed the living nature of ITP technique. The self-assembly of these terpolymers was investigated in films (atomic force microscopy and DSC), as well as in aqueous and organic solvents (DLS). The analysis of crystalline phases based on the FTIR spectroscopy indicated the conversion of PVDF α-phase into α + β-phases and β + γ-phases upon the incorporation of PS and PEO blocks, respectively. The synthesized amphiphilic copolymers were evaluated (fluorescence spectroscopy) as carriers of small hydrophobic molecules in water. © 2019 Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 163–171     

Facile non‐lithographic route to highly aligned silica nanopatterns using unidirectionally aligned polystyrene‐block‐polydimethylsiloxane films

Thin films (monolayer and bilayer) of cylinder forming polystyrene‐block‐polydimethylsiloxane (PS‐b‐PDMS) were shear aligned by the swelling and deswelling of a crosslinked PDMS pad that was physically adhered to the film during solvent vapor annealing. The nanostructures formed by self‐assembly were exposed to ultraviolet‐ozone to partially oxidize the PDMS, followed by calcination in air at 500 °C. In this process, the PS segments were fully decomposed, while the PDMS yielded silica nanostructures. The highly aligned PDMS cylinders were thus deposited as silica nanolines on the silicon substrate. Using a bilayer film, the center‐to‐center distance of these features were effectively halved from 38 to 19 nm. Similarly, by sequential shear‐alignment of two distinct layers, a rhombic array of silica nanolines was fabricated. This methodology provides a facile route to fabricating complex topographically patterned nanostructures. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1058–1064     

A post curing strategy toward the feasible covalent adaptable networks in polyacrylate latex films

The implementation of covalent adaptable networks (CANs) in general resin system is becoming attractive. In this work, we propose a simple post-curing strategy based on the core-shell structured acrylate latex for the achievement on both the improved general performance and the CANs characteristics in latex films. The building to the CANs was relied on the introduction of 4,4′-diaminophenyl disulfide as the curing agent, which cured the acetoacetoxy decorated shell polymer through the ketoamine reaction. The metathesis reaction of aromatic disulfides in the crosslinking segments enabled the thermally induced dynamic behavior of the network as revealed in the stress relaxation tests by comparison with other diamine crosslinking agents without the incorporation of disulfide. The synergism of the dynamic crosslinking of the shell polymer and static crosslinking in the core polymer contributed to the improved mechanical strength (15 MPa, strain% = 250%) and the suppressed water adsorption (~1% in 24 h of soaking) of the latex film, which exhibited above 90% of recovery in both strength and strain from a cut-off film damage within 1 h at 80°C. Moreover, the cured latex film could be recycled, and 75% of the mechanical performance was regained after three fragmentation-hot-pressing cycles. These, in addition with the feasible and environmental friendly characteristics, suggest a sustainable paradigm toward the smart thermosetting latex polymers.     

Synthesis and application of near-infrared absorbing morpholino-containing aza-BODIPYs

Morpholino-containing aza-BODIPYs at 3,5-positions were synthesized. The maxima absorption and emission of these dyes locate at the near-infrared region. Aza-BODIPY 1 with the morpholino group as a pH-sensitive functionality could be used to be a pH probe, and the dramatic increase in fluorescence intensity at 675 nm by about 1500 folds. Moreover, the singlet oxygen generation of PS 2 with the dibromo groups at 2,6-positions was more effective than that of the parent dye 1.     

Emulsion Copolymerization of Vinyl Acetate and Vinyl Silanes: Kinetics and Development of Microstructure

The batch emulsion copolymerization of vinyl acetate with different vinyl silane functional monomers (vinyl trimethoxysilane [VTMS], vinyl triethoxysilane [VTES], and vinyl silanetriol [VSTO]) is studied. The nature of the silane strongly affects the development of the microstructure and crosslinking ability of the latexes. A combination of techniques (Soxhlet extraction, centrifugation, assymetric‐flow field flow fractionation AF4/MALS/RI) shows that the factor controlling the molar mass and crosslinking density is the degree of hydrolysis of the alkoxysilane, producing higher molar masses and degrees of crosslinking when the degree of hydrolysis is high. Thus, the copolymer containing VSTO produced a very crosslinked latex, the one with VTMS produced a latex with a low degree of crosslinking in the wet state that can yield high degrees of crosslinking upon drying, and the latex with VTES do not produce significant amounts of crosslinking neither before nor after drying.     

Recoverable deformation and morphology after uniaxial elongation of a polystyrene/linear low density polyethylene blend

The transient recoverable deformation ratio after melt elongation at various elongational rates and maximum elongations was investigated for pure polystyrene and for a 85 wt.% polystyrene/15 wt.% linear low density polyethylene (PS/LLDPE 85:15) blend at a temperature of 170 ^oC. The ratio p of the zero shear rate viscosity of LLDPE to that of PS is p = 0.059 ≈ 1:17. Retraction of the elongated LLDPE droplets back to spheres and end-pinching is observed during recovery. A simple additive rule is applied in order to extract the contribution of the recovery of the elongated droplets from the total recovery of the blend. In that way, the recoverable portion of the PS/LLDPE blend induced by the interfacial tension is determined and compared with the results of a theory based on an effective medium approximation. The effective medium approximation reproduces well the time scale of the experimental data. In addition, the trends that the recoverable deformation increases with elongational rate and maximum elongation are captured by the theoretical approach.     

Three dimensional accurate morphology measurements of polystyrene standard particles on silicon substrate by electron tomography

Polystyrene latex (PSL) nanoparticle (NP) sample is one of the most widely used standard materials. It is used for calibration of particle counters and particle size measurement tools. It has been reported that the measured NP sizes by various methods, such as Differential Mobility Analysis, dynamic light scattering (DLS), optical microscopy (OM), scanning electron microscopy (SEM) and atomic force microscopy (AFM), differ from each other. Deformation of PSL NPs on mica substrate has been reported in AFM measurements: the lateral width of PSL NPs is smaller than their vertical height. To provide a reliable calibration standard, the deformation must be measured by a method that can reliably visualize the entire three dimensional (3D) shape of the PSL NPs. Here we present a method for detailed measurement of PSL NP 3D shape by means of electron tomography in a transmission electron microscope. The observed shape of the PSL NPs with 100 nm and 50 nm diameter were not spherical, but squished in direction perpendicular to the support substrate by about 7.4% and 12.1%, respectively. The high difference in surface energy of the PSL NPs and that of substrate together with their low Young modulus appear to explain the squishing of the NPs without presence of water film.     

Role of Divalent Metals in Polymer Degradation

The role of divalent metals in the degradation of the physico-mechanical properties of radiation-vulcanized natural rubber latex (RVNRL) films was investigated. RVNRL films were prepared by the addition of metals (Cu, Mg, etc.) of different concentrations (0–30ppm) to natural rubber latex and irradiated with various radiation doses (0–20kGy). The radiation doses were optimized (12kGy), and the adverse effect of metal ions was studied against a reference film prepared with no metal ions. Tensile strength, tear strength, and cross-linking density of the irradiated rubber films decreased with increasing metal ion concentrations and decreasing radiation doses. The mechanical properties of the films were reduced by 10–15% for 30ppm metal ions and at the optimum dose. In contrast, elongation at break, permanent set, and swelling ratio of the films increased at the same conditions. The relative effect of metal ions can be explained by the classical electron concept, reported in this article.     

Degradation of p-nitrophenol (PNP) in aqueous solution by mFe/Cu-air-PS system

In this study, batch experiments were conducted to investigate the performance of microscale Fe/Cu bimetallic particles-air-persulfate system (mFe/Cu-air-PS) for p-nitrophenol (PNP) treatment in aqueous solution. The results indicate that toxic and refractory PNP in aqueous solution could be decomposed effectively and transformed into lower toxicity intermediates.     

Phase separation dynamics of a poly(vinyl methyl ether)/polystyrene (PVME/PS) blend studied by ultrafast differential scanning calorimetry

In this work, ultrafast differential scanning calorimetry (UFDSC) is used to study the dynamics of phase separation. Taking poly(vinyl methyl ether)/polystyrene (PVME/PS) blend as the example, we firstly obtained the phase diagram that has lower critical solution temperature (LCST), together with the glass transition temperature (T_g) of the homogeneous blend with different composition. Then, the dynamics of the phase separation of the PVME/PS blend with a mass ratio of 7:3 was studied in the time range from milliseconds to hours, by the virtue of small time and spatial resolution that UFDSC offers. The time dependence of the glass transition temperature (T_g) of PVME‐rich phase, shows a distinct change when the annealing temperature (T_a) changes from below to above 385 K. This corresponds to the transition from the nucleation and growth (NG) mechanism to the spinodal decomposition (SD) mechanism, as was verified by morphological and rheometric investigations. For the SD mechanism, the temperature‐dependent composition evolution in PVME‐rich domain was found to follow the Williams–Landel–Ferry (WLF) laws. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 1357–1364